Protocol used by GPS tracking devices manufactured by fifotrack headquartered in Shenzhen City, China.
flespi parses the Fifotrack protocol messages into a JSON object with the
fields listed below in the Parameters tab.
To connect your tracker using the fifotrack protocol, you need to have a fifotrack channel created first.
Point your tracker to the channel's domain name:port via SMS or configuration tool provided by the vendor.
Then create a device instance for your tracker and use a 15-character IMEI (usually specified on the tracker casing) in the ident field.
Use the Toolbox tab on the device screen to check if the messages are coming.
ain
number
volts
Voltage on the analog input
alarm.code
number
Protocol-specific alarm code number
battery.charging.status
boolean
Battery charging status
battery.level
number
percentage
Internal battery level
battery.low.status
boolean
Battery low status
battery.voltage
number
volts
Internal battery voltage
channel.id
number
ID of channel that received a message
device.id
number
ID of device that received a message
device.name
string
Name of device that received a message
device.type.id
number
ID of device type of device that received a message
din
number
Digital inputs bitmask
dout
number
Digital outputs bitmask
external.powersource.status
boolean
External power source connection status
external.powersource.voltage
number
volts
External power voltage
external.powersource.voltage.status
boolean
Voltage of external supply is normal (true - inside the predefined range) or abnormal (false - outside of the predefined range)
fatigue.driving.status
boolean
Fatigue driving
fuel.theft.alarm
boolean
Fuel Theft Alarm
geofence.id
number
Geofence ID
geofence.shape
string
Geofence shape
geofence.status
boolean
Geofence entered status
gnss.antenna.disconnected.alarm
boolean
GNSS antenna disconnected or cut off alarm event
gnss.jamming.status
boolean
GNSS receiver signal jamming detected
gsm.cellid
number
Mobile network (GSM, 3G, 4G, LTE, 5G, ...) base station ID
gsm.jamming.event
boolean
Mobile network (GSM, 3G, 4G, LTE, 5G, ...) signal jamming detected
gsm.lac
number
Mobile network (GSM, 3G, 4G, LTE, 5G, ...) location area code
gsm.mcc
number
Mobile network (GSM, 3G, 4G, LTE, 5G, ...) country code
gsm.mnc
number
Mobile network (GSM, 3G, 4G, LTE, 5G, ...) code
gsm.signal.quality
number
The quality (bit error rate) of the Mobile network (GSM, 3G, 4G, LTE, 5G, ...) signal
harsh.acceleration.event
boolean
Harsh acceleration detected
harsh.braking.event
boolean
Harsh braking detected
high.temperature.alarm
boolean
High temperature alarm
ident
string
Device unique identifier like serial number, IMEI, etc
idle.event
boolean
Idle detected
idle.status
boolean
Vehicle is in idling state
low.temperature.alarm
boolean
Low temperature alarm
overspeeding.event
boolean
Overspeeding detected
overtime.parking.alarm
boolean
Over time Parking
peer
string
IP:port from which device connecting to the channel
position.altitude
number
meters
Altitude value for position
position.direction
number
degrees
Heading angle at position detection moment
position.latitude
number
degrees
Latitude coordinate value
position.longitude
number
degrees
Longitude coordinate value
position.satellites
number
Quantity of satellites used to calculate coordinates for given position information
position.speed
number
km/h
Instant speed at position detection moment
position.valid
boolean
Is position information accurate and valid for given timestamp
power.cut.alarm
boolean
External power cut-off alarm event
protocol.id
number
ID of protocol
record.seqnum
number
Registered record sequence number
rfid.code
string
Hexadecimal code of connected RFID
sensor.temperature
number
celsius
Temperature sensor value
server.timestamp
number
seconds
Timestamp when server received a message
sleep.mode.status
boolean
Device is in sleep mode
sos.alarm
boolean
SOS alarm trigerred
timestamp
number
seconds
Message timestamp
vehicle.odometer
number
Vehicle mileage in base units configured in device (km, miles, 100m etc)
vibration.alarm
boolean
Vibration alarm event
wifi.mac.address
string
WiFi MAC address
wifi.signal.strength
number
WiFi signal strength, RSSI
Tags
