Egts protocol

Integration level: params
Protocol developed by the Ministry of Transport of the Russian Federation and used for intersystem communication.
flespi parses the Egts protocol messages into a JSON object with the fields listed below in the Parameters tab.
ain
number
volts
Voltage on the analog input
backup.battery.voltage
number
volts
Backup battery voltage
battery.connected.status
boolean
Internal battery is connected
battery.voltage
number
volts
Internal battery voltage
channel.id
number
ID of channel that received a message
counter
number
Counter value
device.id
number
ID of device that received a message
device.mode
number
Device working mode code
device.name
string
Name of device that received a message
device.type.id
number
ID of device type of device that received a message
digital.sensor
number
Digital sensor value
din
number
Digital inputs bitmask
dout
number
Digital outputs bitmask
event.enum
number
Event code, full list of codes available at separate table
external.powersource.status
boolean
External power source connection status
external.powersource.voltage
number
volts
External power voltage
gnss.type
string
GNSS type: gps, glonass, etc...
gsm.mcc
string
GSM mobile country code
gsm.mnc
string
GSM mobile network code
ident
string
Device unique identificator and optional password
liquid.sensor.data
number
Raw liquid sensor data
liquid.sensor.error.status
boolean
Liquid sensor reading error detected
liquid.sensor.level
number
percentage
Liquid level
liquid.sensor.module.address
number
Liquid sensor module address, i.e. device external port number
liquid.sensor.number
number
Liquid sensor consecutive number
liquid.sensor.volume
number
liters
Liquid volume
loop.in.state
number
Loop in state
message.buffered.status
boolean
Black box message
movement.status
boolean
Current movement state
navigation.module.status
boolean
Navigation module is on
object.id
number
Object identifier
octet.din
number
Additional digital inputs octet
passengers.counter.module.address
number
Passengers counter module address
passengers.in.count
number
The number of passengers who got in
passengers.out.count
number
The number of passengers who got out
passengers.sensor.mask
number
Passengers sensor doors bitmask
peer
string
IP:port from which device connecting to the channel
position.altitude
number
meters
Altitude value for position
position.direction
number
degrees
Heading angle at position detection moment
position.fix.type
number
GNSS fix type enum (0 = "not fixed", 1 = "2D", 2 = "3D")
position.hdop
number
Horizontal dilution of precision
position.latitude
number
degrees
Latitude coordinate value
position.longitude
number
degrees
Longitude coordinate value
position.pdop
number
Position dilution of precision
position.satellites
number
Quantity of satellites used to calculate coordinates for given position information
position.speed
number
km/h
Instant speed at position detection moment
position.timestamp
number
seconds
Timestamp when coordinates where calculated
position.valid
boolean
Is position information accurate and valid for given timestamp
position.vdop
number
Vertical dilution of precision
protocol.id
number
ID of protocol
server.timestamp
number
seconds
Timestamp when server received a message
timestamp
number
seconds
Message timestamp
vehicle.mileage
number
km
Total calculated mileage

EGTS is an intersystem communication protocol described in the order of the Ministry of Transport of the Russian Federation of July 31, 2012 No285. Using this protocol the GPS monitoring data is transferred to various information centers, e.g. ERA-GLONASS, etc.

See EGTS protocol specification here.