cGuard Atom

cGuard Atom GLONASS/GPS tracker relies on an advanced navigation module U-blox MAX-M8, has internal antennas, and a built-in noise reduction.

Protocol: cguard Manufacturer: cGuard Change log: cguard

Usage specifics

Parameters (32)

Commands (1)

AI Assistant

Here’s the like of JSON you get

{
    "ident": "352625333222111",
    "position.altitude": 273.61,
    "position.hdop": 0.7,
    "position.latitude": 49.069782,
    "position.longitude": 28.632826,
    "position.satellites": 18,
    "server.timestamp": 1650636570.426424,
    "timestamp": 1650636570.426424,
    "device.type.id": "cGuard Atom",
    "channel.id": 1111,
    "protocol.id": "cguard"
    "engine.ignition.status": true
    ...
}

How to consume this nice JSON

The easiest way is to make a REST API request like this

curl -X GET  --header 'Authorization: FlespiToken XXX' 'https://flespi.io/gw/devices/<device id>/messages'

Explore REST API Show more ways to consume data How to connect my cGuard Atom to flespi

How to send commands to cGuard Atom?

You can send a specific command. Show all commands

You can also

Modify messages

Add or remove parameters, inject data from LBS and reverse-geocoding services, etc.

Learn what plugins can do

Aggregate data

Determine trips and stops, catch events, detect geofence ins/outs, and more.

Learn about flespi analytics capabilities

Name

Type

Unit

Description

Sources

ain

number

volts

Voltage on the analog input

battery.voltage

number

volts

Internal battery voltage

channel.id

number

ID of channel that received a message

counter.impulses

number

Impulses counter

device.id

number

ID of device that received a message

device.name

string

Name of device that received a message

device.type.id

number

ID of device type of device that received a message

din

number

Digital inputs bitmask

event.enum

number

Protocol-specific event code

external.powersource.voltage

number

volts

External power voltage

gsm.signal.level

number

percentage

Mobile network (GSM, 3G, 4G, LTE, 5G, ...) signal strength level

gsm.sim.status

boolean

SIM card is active

ibutton.code

string

Hexadecimal code of connected iButton

ident

string

Device unique identifier like serial number, IMEI, etc

input.frequency

number

Frequency input

lls.value

number

LLS (Liquid level sensor) fuel value

movement.status

boolean

Current movement state

onewire.input.value

number

OneWinre input

peer

string

IP:port from which device connecting to the channel

position.altitude

number

meters

Altitude value for position

position.direction

number

degrees

Heading angle at position detection moment

position.hdop

number

Horizontal dilution of precision

position.latitude

number

degrees

Latitude coordinate value

position.longitude

number

degrees

Longitude coordinate value

position.satellites

number

Quantity of satellites used to calculate coordinates for given position information

position.speed

number

km/h

Instant speed at position detection moment

position.valid

boolean

Is position information accurate and valid for given timestamp

protocol.id

number

ID of protocol

relay.status

boolean

Relay status

server.timestamp

number

seconds

Timestamp when server received a message

sleep.mode.status

boolean

Device is in sleep mode

timestamp

number

seconds

Message timestamp

Title

Name

Description

Properties

Custom Command Examples

custom

Send custom command over GPRS

payload: Payload

Reboot

{"payload":"PM_REBOOT"}

Get device ID

{"payload":"PARAM_READ:DEVICE_ID"}

Set device ID

{"payload":"PARAM_SET:DEVICE_ID:MY_DEVICE_ID"}

Set ping period

{"payload":"PARAM_SET:PING_PERIOD:10"}

Set server port

{"payload":"PARAM_SET:SERVER_PORT:11111"}

Get hardware version

{"payload":"PARAM_READ:HARDWARE_VERSION"}

Set server IP or domain

{"payload":"PARAM_SET:SERVER_HOST:11111.flespi.gw"}

cGuard Atom

Here’s the like of JSON you get

How to consume this nice JSON

How to send commands to cGuard Atom?

You can also

Modify messages

Aggregate data

More devices from cGuard (2)