LKGPS LK110

LKGPS LK110 is a bicycle taillight GPS Tracker with 4G support. The device features multiple working modes, remote restart, accelerometer, 3700 mAh battery, and more.

Protocol: lkgps Manufacturer: LKGPS Change log: lkgps

Usage specifics

Parameters (32)

Commands (1)

AI Assistant

Here’s the like of JSON you get

{
    "ident": "352625333222111",
    "position.altitude": 273.61,
    "position.hdop": 0.7,
    "position.latitude": 49.069782,
    "position.longitude": 28.632826,
    "position.satellites": 18,
    "server.timestamp": 1650636570.426424,
    "timestamp": 1650636570.426424,
    "device.type.id": "LKGPS LK110",
    "channel.id": 1111,
    "protocol.id": "lkgps"
    "engine.ignition.status": true
    ...
}

How to consume this nice JSON

The easiest way is to make a REST API request like this

curl -X GET  --header 'Authorization: FlespiToken XXX' 'https://flespi.io/gw/devices/<device id>/messages'

Explore REST API Show more ways to consume data How to connect my LKGPS LK110 to flespi

How to send commands to LKGPS LK110?

You can send a specific command. Show all commands

You can also

Modify messages

Add or remove parameters, inject data from LBS and reverse-geocoding services, etc.

Learn what plugins can do

Aggregate data

Determine trips and stops, catch events, detect geofence ins/outs, and more.

Learn about flespi analytics capabilities

Name

Type

Unit

Description

Sources

battery.level

number

percentage

Internal battery level

channel.id

number

ID of channel that received a message

defense.active.status

boolean

Defense activated status

device.id

number

ID of device that received a message

device.name

string

Name of device that received a message

device.type.id

number

ID of device type of device that received a message

engine.ignition.status

boolean

Engine ignition or ACC status

event.seqnum

number

Unique event sequence number

gsm.cellid

number

Mobile network (GSM, 3G, 4G, LTE, 5G, ...) base station ID

gsm.lac

number

Mobile network (GSM, 3G, 4G, LTE, 5G, ...) location area code

gsm.mcc

number

Mobile network (GSM, 3G, 4G, LTE, 5G, ...) country code

gsm.mnc

number

Mobile network (GSM, 3G, 4G, LTE, 5G, ...) code

gsm.signal.dbm

number

dbm

Strength of the Mobile network (GSM, 3G, 4G, LTE, 5G, ...) signal

gsm.sim.iccid

string

Integrated Circuit Card Id of SIM card of the Mobile network (GSM, 3G, 4G, LTE, 5G, ...)

ident

string

Device unique identifier like serial number, IMEI, etc

message.type

string

Message type

overspeeding.event

boolean

Overspeeding detected

peer

string

IP:port from which device connecting to the channel

position.direction

number

degrees

Heading angle at position detection moment

position.latitude

number

degrees

Latitude coordinate value

position.longitude

number

degrees

Longitude coordinate value

position.speed

number

km/h

Instant speed at position detection moment

position.valid

boolean

Is position information accurate and valid for given timestamp

power.cut.alarm

boolean

External power cut-off alarm event

protocol.id

number

ID of protocol

server.timestamp

number

seconds

Timestamp when server received a message

timestamp

number

seconds

Message timestamp

vehicle.mileage

number

Total calculated mileage

vehicle.state

string

Vehicle state, such as moving, idling, parked etc

vehicle.state.bitmask

number

Vehicle state flags bitmask

vendor.code

string

Vendor identification string code

vibration.alarm

boolean

Vibration alarm event

Title

Name

Description

Properties

Custom command Examples

custom

Send custom command to device, Scheme: "*,,#". You have to specify payload only

payload: Payload string

Arm

{"payload":"S6,180305,2"}

Disarm

{"payload":"S6,180305,3"}

Tracking Mode

{"payload":"S71,085902,16,A,5"}

LKGPS LK110

Here’s the like of JSON you get

How to consume this nice JSON

How to send commands to LKGPS LK110?

You can also

Modify messages

Aggregate data

More devices from LKGPS (2)