Wonlex Senior GPS Watch

Wonlex Senior GPS Watch is a safety tracker with SOS alert, HR, BP, SpO2 measurements, fall detection, GPS locator, and a 2G/4G phone. Pressing SOS will trigger a call to emergency contacts, alerting them and sending them an SMS with your GPS location. The loved ones and carers can request the GPS location via the app, and can be notified if the senior person leaves a designated ‘Safe Zone’. What’s more, your loved ones and carers can check your health stats like heart rate, blood pressure, blood oxygen as well, prompting them to check-in and make sure you are in a good health.

Usage specifics
Parameters (45)
Commands (1)
Wonlex Senior GPS Watch
Flespi parses telemetry data from your Wonlex Senior GPS Watch into a standardized JSON and lets you send commands to Wonlex Senior GPS Watch via API.

Here’s the like of JSON you get

{
    "ident": "352625333222111",
    "position.altitude": 273.61,
    "position.hdop": 0.7,
    "position.latitude": 49.069782,
    "position.longitude": 28.632826,
    "position.satellites": 18,
    "server.timestamp": 1650636570.426424,
    "timestamp": 1650636570.426424,
    "device.type.id": "Wonlex Senior GPS Watch",
    "channel.id": 1111,
    "protocol.id": "wonlex"
    "engine.ignition.status": true
    ...
}

How to consume this nice JSON

The easiest way is to make a REST API request like this
curl -X GET  --header 'Authorization: FlespiToken XXX' 'https://flespi.io/gw/devices/<device id>/messages'

How to send commands to Wonlex Senior GPS Watch?

You can send a specific command. Show all commands

You can also

Modify messages

Add or remove parameters, inject data from LBS and reverse-geocoding services, etc.
Learn what plugins can do

Aggregate data

Determine trips and stops, catch events, detect geofence ins/outs, and more.
Learn about flespi analytics capabilities
battery.level
number
percentage
Internal battery level
battery.low.alarm
boolean
Battery low alarm event
battery.low.status
boolean
Battery low status
channel.id
number
ID of channel that received a message
device.id
number
ID of device that received a message
device.name
string
Name of device that received a message
device.type.id
number
ID of device type of device that received a message
fall.alarm.status
boolean
Fall alarm status
geofence.alarm
boolean
Geofence alarm event
geofence.status
boolean
Geofence entered status
gsm.cellid
number
Mobile network (GSM, 3G, 4G, LTE, 5G, ...) base station ID
gsm.lac
number
Mobile network (GSM, 3G, 4G, LTE, 5G, ...) location area code
gsm.mcc
number
Mobile network (GSM, 3G, 4G, LTE, 5G, ...) country code
gsm.mnc
number
Mobile network (GSM, 3G, 4G, LTE, 5G, ...) code
gsm.signal.level
number
percentage
Mobile network (GSM, 3G, 4G, LTE, 5G, ...) signal strength level
gsm.timing.advance
number
Mobile network (GSM, 3G, 4G, LTE, 5G, ...) timing advance
heart.rate.abnormal.alarm
boolean
Abnormal heart rate alarm
ident
string
Device unique identifier like serial number, IMEI, etc
message.content
string
Message content
message.phone.number
string
Message phone number
message.type
string
Message type
peer
string
IP:port from which device connecting to the channel
position.accuracy
number
meters
Position data accuracy in meters
position.altitude
number
meters
Altitude value for position
position.direction
number
degrees
Heading angle at position detection moment
position.latitude
number
degrees
Latitude coordinate value
position.longitude
number
degrees
Longitude coordinate value
position.outdated
boolean
Position information is outdated
position.satellites
number
Quantity of satellites used to calculate coordinates for given position information
position.speed
number
km/h
Instant speed at position detection moment
position.valid
boolean
Is position information accurate and valid for given timestamp
protocol.id
number
ID of protocol
server.timestamp
number
seconds
Timestamp when server received a message
sos.alarm
boolean
SOS alarm triggerred
steps.count
number
The total number of steps for the day
terminal.state.bitmask
number
Terminal state flags bitmask
timestamp
number
seconds
Message timestamp
turnover.number
number
Turnover times
vendor.code
string
Vendor identification string code
watch.running.static.status
boolean
Watch Running static status
wifi.mac.address
string
WiFi MAC address
wifi.signal.strength
number
WiFi signal strength, RSSI
wifi.ssid
string
Wi-Fi SSID name
wristband.connected.status
boolean
Wristband connection status
wristband.takeoff.alarm
boolean
Wristband take off alarm
Properties
Custom command
custom
Send custom command to device
payload: Payload string
Data upload interval setting for 10 seconds
{"payload":"UPLOAD,10"}