To connect your tracker using the ICAR protocol, you need to have an icar channel created first.
Point your tracker to the channel's domain name:port via SMS or configuration tool provided by the vendor.
Then create a device instance for your tracker and use a 15-character IMEI (usually specified on the tracker casing) in the ident field.
Use the Logs & Messages tab on the device screen to check if the messages are coming.
It is possible to configure v devices OTA using the flespi web-based configurator tool. To connect ICAR to Wialon or another platform via flespi please read this article.
Internal battery level
ID of channel that received a message
ID of device that received a message
Name of device that received a message
ID of device type of device that received a message
Unique event sequence number
External power voltage
GSM base station ID
GSM location area code
GSM mobile country code
GSM mobile network code
GSM signal strength level
Device unique identifier like serial number, IMEI, etc
IP:port from which device connecting to the channel
Heading angle at position detection moment
Latitude coordinate value
Longitude coordinate value
Quantity of satellites used to calculate coordinates for given position information
Instant speed at position detection moment
Is position information accurate and valid for given timestamp
ID of protocol
Timestamp when server received a message
Total calculated mileage
Vehicle state, such as moving, idling, parked etc
Vehicle state flags bitmask
Vendor identification string code