Wonde Proud VT-300

Wonde Proud VT-300 is an advanced vehicle GPS tracker working in 2G and 3G networks. The device features GPS + GLONASS navigation, communication by voice, geo-fencing, ignition detection, overspeeding detection, harsh braking / acceleration / cornering detection, towing detection, idling detection, jamming detection, FOTA, configuration over the air, power management, green driving, configurable tracking and logging mode, and more.

Protocol: wondeproud Manufacturer: Wonde Proud Change log: wondeproud

Usage specifics

Parameters (25)

Commands (1)

AI Assistant

Here’s the like of JSON you get

{
    "ident": "352625333222111",
    "position.altitude": 273.61,
    "position.hdop": 0.7,
    "position.latitude": 49.069782,
    "position.longitude": 28.632826,
    "position.satellites": 18,
    "server.timestamp": 1650636570.426424,
    "timestamp": 1650636570.426424,
    "device.type.id": "Wonde Proud VT-300",
    "channel.id": 1111,
    "protocol.id": "wondeproud"
    "engine.ignition.status": true
    ...
}

How to consume this nice JSON

The easiest way is to make a REST API request like this

curl -X GET  --header 'Authorization: FlespiToken XXX' 'https://flespi.io/gw/devices/<device id>/messages'

Explore REST API Show more ways to consume data How to connect my Wonde Proud VT-300 to flespi

How to send commands to Wonde Proud VT-300?

You can send a specific command. Show all commands

You can also

Modify messages

Add or remove parameters, inject data from LBS and reverse-geocoding services, etc.

Learn what plugins can do

Aggregate data

Determine trips and stops, catch events, detect geofence ins/outs, and more.

Learn about flespi analytics capabilities

Name

Type

Unit

Description

Sources

ain

number

volts

Voltage on the analog input

battery.voltage

number

volts

Internal battery voltage

channel.id

number

ID of channel that received a message

device.id

number

ID of device that received a message

device.name

string

Name of device that received a message

device.serial.number

string

Device serial number

device.type.id

number

ID of device type of device that received a message

din

number

Digital inputs bitmask

dout

number

Digital outputs bitmask

driver.id

string

Driver identification card id

event.enum

number

Protocol-specific event code

frequency.counter.din

number

Frequency counter value on digital input

ident

string

Device unique identifier like serial number, IMEI, etc

peer

string

IP:port from which device connecting to the channel

position.altitude

number

meters

Altitude value for position

position.direction

number

degrees

Heading angle at position detection moment

position.latitude

number

degrees

Latitude coordinate value

position.longitude

number

degrees

Longitude coordinate value

position.satellites

number

Quantity of satellites used to calculate coordinates for given position information

position.speed

number

km/h

Instant speed at position detection moment

protocol.id

number

ID of protocol

rfid.code

string

Hexadecimal code of connected RFID

server.timestamp

number

seconds

Timestamp when server received a message

timestamp

number

seconds

Message timestamp

vehicle.mileage

number

Total calculated mileage

Title

Name

Description

Properties

Custom command Examples

custom

Send custom command to device

payload: Command payload

wait_ack: Wait ACK

Reset the device (0000 is a password)

{"payload":"REBOOT=0000"}

Query IMEI number of GSM module (0000 is a password)

{"payload":"IMEI=0000"}

Activate digital output 1 for 20 ms 2 times (0000 is a password)

{"payload":"OUTC=0000,1,1,20,2"}

Wonde Proud VT-300

Here’s the like of JSON you get

How to consume this nice JSON

How to send commands to Wonde Proud VT-300?

You can also

Modify messages

Aggregate data

More devices from Wonde Proud (12)