Protocol used by GPS tracking devices manufactured by iTER IoT Solutions headquartered in Brazil.
flespi parses the Iter protocol messages into a JSON object with the
fields listed below in the Parameters tab.
To connect your tracker using the iTER protocol, you need to have a iter channel created first.
Point your tracker to the channel's domain name:port via SMS or configuration tool provided by the vendor.
Then create a device instance for your tracker and use a 15-character IMEI (usually specified on the tracker casing) in the ident field.
Use the Toolbox tab on the device screen to check if the messages are coming.
ain
number
volts
Voltage on the analog input
alarm.code
number
Protocol-specific alarm code number
battery.low.alarm
boolean
Battery low alarm event
battery.voltage
number
volts
Internal battery voltage
channel.id
number
ID of channel that received a message
device.id
number
ID of device that received a message
device.name
string
Name of device that received a message
device.type.id
number
ID of device type of device that received a message
device.vehicle.compatible.status
boolean
The device is compatible with the vehicle or not.
din
number
Digital inputs bitmask
dout
number
Digital outputs bitmask
engine.ignition.on.duration
number
seconds
Duration when engine is on
engine.ignition.status
boolean
Engine ignition or ACC status
external.powersource.status
boolean
External power source connection status
geofence.in.alarm
boolean
Geofence in alarm event
geofence.out.alarm
boolean
Geofence out alarm event
gnss.status
boolean
GNSS receiver on/off status
gps.satellites.status
boolean
GPS positioning system status
gsm.cellid
number
Mobile network (GSM, 3G, 4G, LTE, 5G, ...) base station ID
gsm.lac
number
Mobile network (GSM, 3G, 4G, LTE, 5G, ...) location area code
gsm.mcc
number
Mobile network (GSM, 3G, 4G, LTE, 5G, ...) country code
gsm.mnc
number
Mobile network (GSM, 3G, 4G, LTE, 5G, ...) code
gsm.signal.dbm
number
dbm
Strength of the Mobile network (GSM, 3G, 4G, LTE, 5G, ...) signal
ident
string
Device unique identifier like serial number, IMEI, etc
movement.status
boolean
Current movement state
peer
string
IP:port from which device connecting to the channel
position.altitude
number
meters
Altitude value for position
position.direction
number
degrees
Heading angle at position detection moment
position.latitude
number
degrees
Latitude coordinate value
position.longitude
number
degrees
Longitude coordinate value
position.satellites
number
Quantity of satellites used to calculate coordinates for given position information
position.speed
number
km/h
Instant speed at position detection moment
power.cut.alarm
boolean
External power cut-off alarm event
protocol.id
number
ID of protocol
record.seqnum
number
Registered record sequence number
report.reason
number
Transmission reason code
rfid.code
string
Hexadecimal code of connected RFID
server.timestamp
number
seconds
Timestamp when server received a message
sos.alarm
boolean
SOS alarm triggerred
timestamp
number
seconds
Message timestamp
vehicle.mileage
number
km
Total calculated mileage
vehicle.state.bitmask
number
Vehicle state flags bitmask
