Telitek protocol

Integration level: params
Protocol used by GPS tracking devices manufactured by Telitek headquartered in Canada.
flespi parses the Telitek protocol messages into a JSON object with the fields listed below in the Parameters tab.
backup.battery.voltage
number
volts
Backup battery voltage
battery.voltage
number
volts
Internal battery voltage
channel.id
number
ID of channel that received a message
device.id
number
ID of device that received a message
device.name
string
Name of device that received a message
device.temperature
number
celsius
Temperature of device
device.type.id
number
ID of device type of device that received a message
door.open.status
boolean
Door open status
event.code
string
Unique event identifier string
external.powersource.status
boolean
External power source connection status
gsm.network.name
string
GSM operator name
gsm.network.type
string
The type of the mobile network the device is currently registered to
ident
string
Device unique identificator and optional password
movement.status
boolean
Current movement state
peer
string
IP:port from which device connecting to the channel
position.direction
number
degrees
Heading angle at position detection moment
position.hdop
number
Horizontal dilution of precision
position.latitude
number
degrees
Latitude coordinate value
position.longitude
number
degrees
Longitude coordinate value
position.pdop
number
Position dilution of precision
position.speed
number
km/h
Instant speed at position detection moment
position.valid
boolean
Is position information accurate and valid for given timestamp
protocol.id
number
ID of protocol
report.reason
number
Transmission reason code
server.timestamp
number
seconds
Timestamp when server received a message
timestamp
number
seconds
Message timestamp

To connect your tracker using the Telitek protocol, you need to have a telitek channel created first.

Point your tracker to the channel's domain name:port via SMS or configuration tool provided by the vendor.

Then create a device instance for your tracker and use a 15-character IMEI (usually specified on the tracker casing) in the ident field.

Use the Toolbox tab on the device screen to check if the messages are coming.

To connect Telitek to Wialon or another platform via flespi please read this article.