Xeelectech XE710

Xeelectech XE710 is a compact GPS tracker suitable for vehicles, motorcycles, etc.

Usage specifics
Parameters (25)
Commands (1)
Xeelectech XE710
Flespi parses telemetry data from your Xeelectech XE710 into a standardized JSON and lets you send commands to Xeelectech XE710 via API.

Here’s the like of JSON you get

{
    "ident": "352625333222111",
    "position.altitude": 273.61,
    "position.hdop": 0.7,
    "position.latitude": 49.069782,
    "position.longitude": 28.632826,
    "position.satellites": 18,
    "server.timestamp": 1650636570.426424,
    "timestamp": 1650636570.426424,
    "device.type.id": "Xeelectech XE710",
    "channel.id": 1111,
    "protocol.id": "xeelectech"
    "engine.ignition.status": true
    ...
}

How to consume this nice JSON

The easiest way is to make a REST API request like this
curl -X GET  --header 'Authorization: FlespiToken XXX' 'https://flespi.io/gw/devices/<device id>/messages'

How to send commands to Xeelectech XE710?

You can send a specific command. Show all commands

You can also

Modify messages

Add or remove parameters, inject data from LBS and reverse-geocoding services, etc.
Learn what plugins can do

Aggregate data

Determine trips and stops, catch events, detect geofence ins/outs, and more.
Learn about flespi analytics capabilities
battery.level
number
percentage
Internal battery level
channel.id
number
ID of channel that received a message
device.id
number
ID of device that received a message
device.name
string
Name of device that received a message
device.type.id
number
ID of device type of device that received a message
event.seqnum
number
Unique event sequence number
gsm.cellid
number
Mobile network (GSM, 3G, 4G, LTE, 5G, ...) base station ID
gsm.lac
number
Mobile network (GSM, 3G, 4G, LTE, 5G, ...) location area code
gsm.mcc
number
Mobile network (GSM, 3G, 4G, LTE, 5G, ...) country code
gsm.mnc
number
Mobile network (GSM, 3G, 4G, LTE, 5G, ...) code
ident
string
Device unique identifier like serial number, IMEI, etc
message.type
string
Message type
peer
string
IP:port from which device connecting to the channel
position.direction
number
degrees
Heading angle at position detection moment
position.latitude
number
degrees
Latitude coordinate value
position.longitude
number
degrees
Longitude coordinate value
position.speed
number
km/h
Instant speed at position detection moment
position.valid
boolean
Is position information accurate and valid for given timestamp
protocol.id
number
ID of protocol
server.timestamp
number
seconds
Timestamp when server received a message
timestamp
number
seconds
Message timestamp
vehicle.mileage
number
km
Total calculated mileage
vehicle.state
string
Vehicle state, such as moving, idling, parked etc
vehicle.state.bitmask
number
Vehicle state flags bitmask
vendor.code
string
Vendor identification string code
Properties
Custom command
custom
Send custom command to device without waiting for response, Scheme: "*,,#". You have to specify payload only
payload: Payload string
Mileage query command S32
{"payload":"S32,000000,1"}