Concox JS40

Concox JS40 is an electric scooter equipped with a 4G IoT module for easy sharing. The scooter features a powerful 350W motor suitable for riding up to 40km at the speed up to 30km/h, automatic charging termination, LED display to view battery life, speed and fault code, anti-vandal alarm, lightweight aluminum frame, and solid tires. 

Concox JS40 configuration possibilities overview available on top of flespi.

Title Name Description Properties
Add Fence add_fence Add fence. It is possible to add up to 5 fences. To delete fence use corresponding setting. New fence will have the smallest vacant ID. New fence is created active by default. Use corresponding setting to inactivate fence. lat: Latitude

lon: Longitude

mode: Mode

radius: Radius
GPRS Setup apn2 Configure APN parameters auto: Auto APN
Brake Lights bled Brake lights settings. To change scooter settings, the scooter should be first switched to "Enabled" mode with corresponding setting. mode: Mode
Delete Fence delete_fence Delete fence by number. num: Fence
Device Information device_info Device Information imsi: IMSI

iccid: ICCID

chip_id: Chip ID

password: Password

secret_key: Secret Key

software_ver: Software Version

bluetooth_mac: Bluetooth MAC
Additional Information device_info2 Additional Device Information user_id: User ID

motor_sn: Motor SN

device_sn: Device SN

battery_sn: Battery SN
Disable Scooter disable
Disassemble Alarm disassemble_alarm Disassemble Alarm enable: Enable
Reset to Factory Defaults ecu_reset Reset scooter control unit to factory default settings
Scooter Parameters ecuset Scooter working parameters setup. To change scooter settings it should be first switched to "Enabled" mode with corresponding setting. led: LED Mode

accel: Acceleration Mode

cruise: Automatic Cruise

zero_speed: Zero-Speed Startup
Information Packet Upload ecutimer Readtime information packet upload settings for different working modes enabled: Enabled Mode

charging: Charging Mode

disabled: Disabled Mode
Enable Scooter enable
Activate Fence enable_fence Activate or deactivate (open/close) fence by number. num: Fence

enable: Activate
Fences fences This setting only displays fences that are configured for the device. Use corresponding settings to add, delete or activate/deactivate geofence. fence1: Fence 1

fence2: Fence 2

fence3: Fence 3

fence4: Fence 4

fence5: Fence 5
Head Lights fled Head lights settings. To change scooter settings, the scooter should be first switched to "Enabled" mode with corresponding setting. mode: Mode
GPS ON gpson Temporarily enable GPS positioning ival: Upload Interval

period: GPS ON Period
GPS Tracking Intervals gtimer GPS position detection intervals for various working modes enabled: Enabled Mode

release: Release Mode

charging: Charging Mode

disabled: Disabled Mode
Heartbeat Interval hbt Set heartbeat interval. hbt: Interval
Horn horn Horn output control mode: Horn Output
Low Battery Alarm iot_low_bat_alarm Terminal low battery alarm enable: Enable
Shutdown Alarm iot_shutdown_alarm Terminal low power shutdown alarm enable: Enable
Lock Scooter lock
Reset Mileage mileage_reset Clear the total mileage of the scooter. To reset mileage, the scooter should be first switched to "Enabled" mode with corresponding setting.
Restart reset Restart Scooter IoT module. Restart delay is 20 seconds.
Scooter Low Power Alarm scooter_low_power Scooter battery low power alarm enable: Enable
Secondary Server Setup secondary_server2 Configure secondary backend server parameters mode: Host Mode
Server Connection Switch secondary_server_attempts Secondary server connection settings switch: Enable
Sensitivity sens_level Sensitivity level for vibration alarm level: Level
Server Setup server2 Configure backend server parameters mode: Host Mode
Speed Limit speedlimit Scooter speed limit. To change scooter speed limit, the scooter should be first switched to "Enabled" mode with corresponding setting. limit: Limit
Static Filter static_filter Static dright filtering mechanism settings enable: Enable

radius: Radius
Static Mode staticrep Static mode parameters ival: Time Range

count: Detections Count

speed: Speed Level

last_pos: Last Position
Status status Update status of the scooter
Status status_info Scooter status. To update scooter status use corresponding command on Actions tab. gps: GPS

gsm: GSM Signal Level

gprs: GPRS

battery: Battery

scooter: Scooter
Vibration Alarm vibr_alarm2 Vibration alarm enable: Enable
Where where Obtain real-time position of the scooter