WiaTag

software tracker

WiaTag is a special application for smartphones and tablets that turns them into software GPS trackers. Available for Android and iOS.

Check the configuration guide here.

Make your WiaTag devices a part of any infrastructure by connecting them via flespi telematics hub. Manage the device settings using flespi device management platform. Learn how to configure WiaTag with flespi.

Protocol: wiatag Manufacturer: Gurtam Change log: wiatag

Usage specifics

Parameters (28)

Settings (15)

Commands (3)

AI Assistant

Here’s the like of JSON you get

{
    "ident": "352625333222111",
    "position.altitude": 273.61,
    "position.hdop": 0.7,
    "position.latitude": 49.069782,
    "position.longitude": 28.632826,
    "position.satellites": 18,
    "server.timestamp": 1650636570.426424,
    "timestamp": 1650636570.426424,
    "device.type.id": "WiaTag",
    "channel.id": 1111,
    "protocol.id": "wiatag"
    "engine.ignition.status": true
    ...
}

How to consume this nice JSON

The easiest way is to make a REST API request like this

curl -X GET  --header 'Authorization: FlespiToken XXX' 'https://flespi.io/gw/devices/<device id>/messages'

Explore REST API Show more ways to consume data How to connect my WiaTag to flespi

How to send commands to WiaTag?

You can send a specific command. Show all commands

You can use pre-defined settings to send instructions more conveniently. Show all settings

You can also

Modify messages

Add or remove parameters, inject data from LBS and reverse-geocoding services, etc.

Learn what plugins can do

Aggregate data

Determine trips and stops, catch events, detect geofence ins/outs, and more.

Learn about flespi analytics capabilities

Name

Type

Unit

Description

Sources

alarm.event

boolean

Alarm event triggered

battery.level

number

percentage

Internal battery level

channel.id

number

ID of channel that received a message

custom

any

Any custom parameter

device.id

number

ID of device that received a message

device.name

string

Name of device that received a message

device.type.id

number

ID of device type of device that received a message

driver.message

string

Driver text message content

gsm.cellid

number

Mobile network (GSM, 3G, 4G, LTE, 5G, ...) base station ID

gsm.lac

number

Mobile network (GSM, 3G, 4G, LTE, 5G, ...) location area code

gsm.mcc

number

Mobile network (GSM, 3G, 4G, LTE, 5G, ...) country code

gsm.mnc

number

Mobile network (GSM, 3G, 4G, LTE, 5G, ...) code

gsm.network.name

string

Mobile network (GSM, 3G, 4G, LTE, 5G, ...) operator name

gsm.signal.level

number

percentage

Mobile network (GSM, 3G, 4G, LTE, 5G, ...) signal strength level

ident

string

Device unique identifier like serial number, IMEI, etc

media

boolean

Message contain media file

media.image

object

Image file in media storage

peer

string

IP:port from which device connecting to the channel

position.accuracy

number

meters

Position data accuracy in meters

position.altitude

number

meters

Altitude value for position

position.direction

number

degrees

Heading angle at position detection moment

position.latitude

number

degrees

Latitude coordinate value

position.longitude

number

degrees

Longitude coordinate value

position.satellites

number

Quantity of satellites used to calculate coordinates for given position information

position.speed

number

km/h

Instant speed at position detection moment

protocol.id

number

ID of protocol

server.timestamp

number

seconds

Timestamp when server received a message

timestamp

number

seconds

Message timestamp

Title

Name

Description

Properties

Pair BLE Beacon

ble_beacon_pair

uuid: BLE Beacon UUID

Message to chat

message

Send text message to the application chat

payload: Payload

Operation mode

operation_mode

You can select one of the three operation modes. Each mode has its own settings for data collection and sending.

config: Command mode

can_switch_mode: Allow the user to view and select operation modes in the mobile application

Work on schedule

schedule

Set time to start and stop the application (only for Android devices).

schedule: Enable the ‘Work on schedule’ mode

Start/Stop Service

service

Close the application on the phone

enable: Enable

Tracking Control

tracking_control

Allow the user to turn off tracking in the mobile application

can_turn_off_service: Allow the user to turn off tracking in the mobile application

BLE beacon

widget_ble

Specify the unique identifier of the BLE beacon that should be paired with the device.

ble: Use the BLE function

Use the chat function

widget_chat

Use the chat function

chat: Use the chat function

Send images from the application

widget_image

Send images from the application

image: Send images from the application

Send location

widget_location

Send location

location: Send location

Use the NFC function

widget_nfc

Use the NFC function. (Available for configuration only in IOS version)

nfc: Use the NFC function

Send photos from the application

widget_photo

Send SOS messages

photo: Send photos from the application

Scan QR-codes

widget_qr

Scan QR-codes

qr: Scan QR-codes

Send SOS messages

widget_sos

Send SOS messages

sos: SOS

Status settings

widget_statuses

Enable the ‘Status’ widget and create statuses depending on your work purposes. The status selected in the mobile application is sent to the monitoring system as a parameter.

statuses: Use the 'Statuses' function

Title

Name

Description

Properties

Send Message

message

Send message to WiaTag chat

payload: Message

Send Application Settings

settings

Send settings json to WiaTag application

payload: Settings json

Take a photo

take_photo

Take a photo

WiaTag

Here’s the like of JSON you get

How to consume this nice JSON

How to send commands to WiaTag?

You can also

Modify messages

Aggregate data

More devices from Gurtam (3)