Gosafe G6S

Gosafe G6S is a hi-end quad-band GSM/GPRS tracking device available in 2G and 3G versions. The device is equipped by over-the-air device management and maintenance system, and supports FOTA (firmware update over the air), flexible programming rules, GSM jamming detection, geo-fencing, internal backup battery, intelligent power management, and a lot more.

Title Name Description Properties
ADC data bitmask adc_data Determine the ADC parameters that will come from device. adc1: ADC1 Voltage

adc2: ADC2 Voltage

backup_battery: Backup Battery

external_power: External Power
COT data bitmask cot_data Determine the COT parameters that will come from device. in0: IN0 frequency/pulse data

in1: IN1 frequency/pulse data

in2: IN2 frequency/pulse data

in3: IN3 frequency/pulse data

mileage: Mileage

engine_hours: Engine hours
DTT data bitmask dtt_data Determine the device status data that will come from device. io_status: I/O Status

packet_type: Packet Type Indicator

event_status: Event Status

device_status: Device Status

high36_geofences: High 36 Geofences Status

low120_geofences: Low 120 Geofences Status
Report Interval of Dynamic Mode dynamic_report_interval GPRS server report interval of mode1 (dynamic). Valid only when report interval switching mode is enabled. See "Report interval mode switching condition" setting interval: Report interval

time_unit: Report interval time unit

data_format: Data format

report_mode: Report mode
Connectivity Setup gprs_setup GPRS Setup. gprs: GPRS Communication Properties

server: Backend Server Communication Properties
GPS data bitmask gps_data Determine the GPS parameters that will come from device. hdop: HDOP

vdop: vdop

speed: Speed

course: Azimuth

lat_lon: Latitude and Longitude

altitude: Altitude

sats_num: Valid satellites number
GSM data bitmask gsm_data Determine the GSM parameters that will come from device. bs1: First Base Station

bs2: Second Base Station

bs3: Third Base Station

bs4: Fourth Base Station

bs5: Fifth Base Station

bs6: Sixth Base Station

bs7: Seventh Base Station

signal_lvl: Registration Status and CSQ Signal Level
Heartbeat Interval heartbeat_interval Setup Heartbeat Packet Interval. Set up the heartbeat packet uploading time interval of TCP/UDP sever, keep the sever and device connected. interval: Interval
Report interval mode switching condition report_interval_mode_switching Report interval switching condition. Set up conditions when to switch from static to dynamic report mode. stop: Stop

acc_off: ACC is off

backup_battery: Backup battery usage

domestic_roaming: Domestic roaming

international_roaming: International roaming
Report Interval of Static Mode static_report_interval GPRS server report interval of mode0 (static). interval: Report interval

time_unit: Report interval time unit

data_format: Data format

report_mode: Report mode
System data bitmask system_data Determine the system parameters that will come from device. fw_version: Firmware version

hw_version: Hardware version

device_name: Device name