Queclink GB100

Queclink GB100 is a battery-mounted insurance GPS tracker with Bluetooth support. The device features a 3-axis accelerometer, integrated GSM and GNSS antennas, driver behavior monitoring, power saving, motion detection, IP65-compliant casing, and more.

Title Name Description Properties
Backend Server Setup backend_server Configure the backend server information host: Host

port: Port

heartbeat: Heartbeat Interval

buffer_mode: Buffering mode

report_mode: Report Mode

sack_enable: Server ACK
Device Parameters config_gb Configure global parameters of the device. agps: AGPS Mode enable

led_mode: LEDs working mode

odometer: Odometer

pwr_mode: Power saving mode

inf_report: Information Report

device_name: Device Name

new_password: New Device Password

gps_lost_time: GPS lost time

location_by_call: Location By Call
Device Information device_info Generic device information name: Device Name

protocol: Protocol Version
Events events_gb Configure events that will cause reporting a message to the backend server. bpl_event: Backup battery is low

btc_event: Backup battery started charging

igl_event: Send GPS position when virtual ignition on/off

ign_event: Report virtual ignition on/off events

mpf_event: Main power supply disconnected

mpn_event: Main power supply connected

pdp_event: Report GPRS connection established

pfa_event: Power off event

pna_event: Power on event

rtl_event: Report GPS position when power off

stc_event: Backup battery stopped charging

stt_event: Device motion state changed
External Power Supply Alarm ext_power_alarm_without_output External Power Supply Alarm configuration mode: Mode

sync: Sync With FRI

debounce: Debounce Time

max_threshold: Max Threshold

min_threshold: Min Threshold
Fixed Report fixed_report_gb Fixed Report Configuration: GPS Tracking Mode Setup mode: Working Mode

corner: Corner Report

time_range: Time Range

without_gps: Reporting Without GPS

igf_interval: Engine Off Position Reporting

check_interval: Check interval
GNSS Assisted Motion gnss_motion_detection_gb100 GNSS assisted motion detection settings speed: Speed Mode

enable: Enable Function

move_time: Motion Time

speed_lvl: Speed Threshold

still_time: Motionless Time

gnss_fail_time: GNSS Fix Failure Timeout
GSM Reports gsm_reports_gb Control how or when to report cells’ information. mode: GSM Reports Mode

reports: Select reports
GSM Network Setup network_gsm Configure the GPRS/WCDMA/3G parameters in GSM networks apn: APN

password: APN Password

username: APN Username
Report Composition report_gb Configure the composition of report message and GPS information. alt_enable: Altitude

gsm_enable: GSM tower data

mil_enable: Mileage

dname_enable: Device name

speed_enable: Speed

stime_enable: Send time

course_enable: Course
Tow Alarm tow_alarm_without_output Tow alarm configuration rest_dur: Stillness Timeout

engine_off: Engine Off timeout

motion_dur: Motion Timeout

tow_enable: Tow Alarm

motion_sens: Motion Sensor Sensitivity

tow_timeout: Tow Alarm Timeout

tow_interval: Tow Interval
Versions Information versions Device versions information fw_ver: Firmware Version

hw_ver: Hardware Version

mcu_ver: MCU Version
Accelerometer Virtual Ignition virt_ign_accel_gb100 Accelerometer (motion status) virtual ignition settings rest_timeout: Rest Duration

motion_timeout: Motion Validity
Virtual Ignition Mode virt_ign_mode_gb100 Virtual ignition working mode mode: Working Mode
Voltage Virtual Ignition virt_ign_volt_gb100 Voltage virtual ignition settings smart: Smart Voltage Adjustment

on_voltage: Ignition ON Voltage

debounce_on: Ignition ON Debounce

debounce_off: Ignition OFF Debounce

voltage_offset: Voltage Offset