Queclink GV300

Queclink GV300 is a compact GPS tracker designed for a wide variety of vehicle tracking applications. Its built-in GPS receiver has superior sensitivity and fast time to first fix.

Title Name Description Properties
Device Parameters config Configure global parameters of the device. led_mode: LEDs working mode

pwr_mode: Power saving mode

inf_report: Information report function

odo_enable: Odometer function enable

pin15_mode: Pin 15 mode

odo_init_mil: Initial mileage value for odometer

gps_lost_time: GPS lost time

inf_report_interval: Information report interval
Events events Configure events that will cause reporting a message to the backend server. ant_event: External GPS antenna status changed

bpl_event: Backup battery is low

btc_event: Backup battery started charging

igl_event: Send GPS position when ignition on/off

ign_event: Report ignition on/off events

mpf_event: Main power supply disconnected

mpn_event: Main power supply connected

pdp_event: Report GPRS connection established

pfa_event: Power off event

pna_event: Power on event

rtl_event: Report GPS position when power off

stc_event: Backup battery stopped charging

stt_event: Device motion state changed

ufs_event: UFSxxx fault code
Connectivity Setup gprs_setup Configure the GPRS parameters and backend server information. gprs: Network Communication Properties

server: Backend Server Communication Properties
Device Password pass_device Device password, used to execute commands. password: Password
Report Composition report Configure the composition of report message and GPS information. alt_enable: Altitude

gsm_enable: GSM tower data

mil_enable: Mileage

dname_enable: Device name

speed_enable: Speed

stime_enable: Send time

course_enable: Course
Tow Alarm tow_alarm Tow Alarm Settings. rest_dur: Stillness timeout

output_id: Output ID

engine_off: Engine off timeout

motion_dur: Motion timeout

output_dur: Output toggle period

tow_enable: Tow alarm

motion_sens: Motion sensor sensibility

tow_timeout: Tow alarm timeout

tow_interval: Tow interval

output_status: Output status

output_toggles: Output toggle times
GPS Tracking Mode track_mode GPS Tracking Mode Setup. Configure conditions to generate tracking reports. mode: GPS tracking report mode

mileage: Send mileage

distance: Send distance

no_gps_report: Reporting without GPS

send_interval: Send interval
GPS Tracking Options track_option Set up additional GPS tracking options. corner: Corner value

ac100_set: AC100

fs_volume: Fuel volume in liters

fuel_sensor: Fuel sensor

igf_interval: Ignition Off send interval

fs_percentage: Fuel level in %
GPS Tracking Period track_period Set up time period when GPS tracking will be performed. By default, GPS tracking is performed 24h. enabled: Reporting period

stop_hr: Stop hour

start_hr: Start hour

stop_min: Stop min

start_min: Start min